Set up your audio
Pioneer DJM-450
Choose your setup… (Practice, Home or Pro). Choice of setup does not change recording or streaming quality.
Practice: your laptop's own speakers
Fine for practice. For louder sound, use Pro or Home.
Always beatmatch in headphones, your computer audio will be slightly out of phase.
Plug your headphones into your mixer or controller, not your computer.
| From | To | Cable | |
|---|---|---|---|
| Pioneer DJM-450USB | ComputerUSB | USB-B to USB-C, or USB-B to USB-A | |
| Pioneer DJM-450PHONES | Headphones |
Home: your computer feeds your speakers
From your computer's 3.5 mm headphone socket. Advice only: computer volume between half and three quarters. For better sound, we recommend an audio interface.
Always beatmatch in headphones, your computer audio will be slightly out of phase.
Plug your headphones into your mixer or controller, not your computer.
| From | To | Cable | |
|---|---|---|---|
| Pioneer DJM-450USB | ComputerUSB | USB-B to USB-C, or USB-B to USB-A | |
| ComputerSound out | Powered speakers or amp | 3.5 mm jack to two XLR, or 3.5 mm jack to two jack (¼"), or 3.5 mm jack to two RCA | |
| Pioneer DJM-450PHONES | Headphones |
Pro: an audio interface feeds your speakers
See our suggested audio interfaces.
Always beatmatch in headphones, your computer audio will be slightly out of phase.
Plug your headphones into your mixer or controller, not your computer.
| From | To | Cable | |
|---|---|---|---|
| Pioneer DJM-450USB | ComputerUSB | USB-B to USB-C, or USB-B to USB-A | |
| Audio interfaceUSB | ComputerUSB | USB cable | |
| Audio interfaceOutputs | Powered speakers or amp | ||
| Pioneer DJM-450PHONES | Headphones |
Your computer
Your gear
Club mixer (with CDJs, turntables or a controller)
Playing vinyl? Plug your turntables into the mixer as usual: your B2B partner hears your records through it. BPM, key and the shared waveform need digital players.
Your mixer
Pioneer DJM-450
- Download the DJM-450 audio driver from AlphaTheta's support page: install it for Mac or Windows.
- On a Mac: macOS Tahoe 26: verified by Pioneer DJ.
- Unplug the mixer's USB cable, open the driver and follow the steps.
- On a Mac: Applications → Pioneer → DJM-450 → DJM-450 Settings Utility.
- On Windows: Open the Start menu and find DJM-450 Settings Utility.
- Click the MIXER OUTPUT tab, and under Mixer Audio Output set USB1/2 to REC OUT. That's your mix.
- Add the additional cables in accordance with the selected diagram above.
- On a Mac: Sound from other DJs is allocated a channel on your mixer. This is your B2B channel. Choose a B2B channel on your mixer by turning the channel's input selector to match your computer's input - the computer mark (a laptop icon).
- On Windows: Your B2B channel is CH1: turn CH1's input selector to the computer mark (a laptop icon).
- Master level off to infinity to avoid phasing.
- On a Mac: In DJ back 2 back's Settings → Audio, find Source and pick the DJM-450 with Source channels USB 1/2. Under Line out, pick the DJM-450 with Line out channels for your B2B channel: USB1/2 for CH1, 3/4 for CH2.
- On Windows: On the Sound panel's Playback tab, open your mixer's Properties, go to Advanced, and untick "Allow applications to take exclusive control of this device". Do the same on the Recording tab. Otherwise another app can take over your mixer, and DJ back 2 back goes silent.
- On Windows: In DJ back 2 back's Settings → Audio, find Source and pick the DJM-450 with Source channels USB 1/2. Under Line out, pick the DJM-450 with Line out channels for your B2B channel: USB1/2 for CH1.
PA or Mains
- Powered speakers: run a cable from your audio interface's speaker outputs straight into the speakers.
- On a Mac: Powered speakers: run a cable from your Mac's output straight into the speakers.
- On Windows: Powered speakers: run a cable from your PC's output straight into the speakers.
- Your laptop's own speakers play your set and your B2B partner's. Fine for practice; for louder sound, use Pro or Home.
- An amp and speakers: run the same cable into the amp's input. The amp drives your speakers as usual.
- In your first session: while you play, your track should sound once and clean. Once your B2B partner has taken over, your speakers play their set, it's not in your headphones. After handover it's back on your mixer ready to beatmatch.
In a set
In a set, the app shows these buttons and messages: READY · Set starts in · Handover · Accept handover · Confirm partner is mixed out · Fader up.
- When offered a handover, make sure your B2B channel's fader is up, then click Accept and mix in your track.
- You have control. Once you're in, confirm your partner is mixed out.
- When you're ready, you hand over, your partner accepts and tells you when you're mixed out, and you can stop your track.
Your internet
Use a wired connection wherever possible.
Upload speed: 5 Mbps or more, or quality may drop.
How a set sounds depends on both DJs' internet connections, which we don't control. We can't promise a connection will be good enough.
Any issues? Email support@djb2b.com