Doors just opened. It's still the warm-up in here. Grab your spot and check back as the floor fills up.

B2B Beta

Set up your audio

Pioneer DJM-A7

Choose your setup… (Practice, Home or Pro). Choice of setup does not change recording or streaming quality.

Practice: your laptop's own speakers

Wiring: computer, Pioneer DJM-A7, headphonesComputerUSBPioneer DJM-A7USB A (USB-C)MASTER 1(XLR)PHONES(6.35 mm / 3.5 mm)HeadphonesUSB-C to USB-Cleave empty, or turnits level fullydown.

Fine for practice. For louder sound, use Pro or Home.

Always beatmatch in headphones, your computer audio will be slightly out of phase.

Plug your headphones into your mixer, not your computer.

Strongly recommended: connect your computer to the internet with an Ethernet cable. Wi-Fi works, but a cable keeps the set steadier.

FromToCable
Pioneer DJM-A7USB A or USB BComputerUSBUSB-C to USB-C
Pioneer DJM-A7PHONESHeadphones

Home: your computer feeds your speakers

Wiring: computer, Pioneer DJM-A7, powered speakers or amp, headphonesComputerUSBsound outPioneer DJM-A7USB A (USB-C)MASTER 1(XLR)PHONES(6.35 mm / 3.5 mm)Powered speakersor ampHeadphonesUSB-C to USB-Cleave empty, or turnits level fullydown.3.5 mm jack to two XLR, or3.5 mm jack to two jack (¼"), or3.5 mm jack to two RCA

From your computer's 3.5 mm headphone socket. Advice only: computer volume between half and three quarters. For better sound, we recommend an audio interface.

Always beatmatch in headphones, your computer audio will be slightly out of phase.

Plug your headphones into your mixer, not your computer.

Strongly recommended: connect your computer to the internet with an Ethernet cable. Wi-Fi works, but a cable keeps the set steadier.

FromToCable
Pioneer DJM-A7USB A or USB BComputerUSBUSB-C to USB-C
ComputerSound outPowered speakers or amp3.5 mm jack to two XLR, or 3.5 mm jack to two jack (¼"), or 3.5 mm jack to two RCA
Pioneer DJM-A7PHONESHeadphones

Pro: an audio interface feeds your speakers

Wiring: computer, audio interface, Pioneer DJM-A7, powered speakers or amp, headphonesComputerUSBUSBAudiointerfaceUSBoutputsPioneer DJM-A7USB A (USB-C)MASTER 1(XLR)PHONES(6.35 mm / 3.5 mm)Powered speakersor ampHeadphonesUSB-C to USB-Cleave empty, or turnits level fullydown.USB cable

See our suggested audio interfaces.

Always beatmatch in headphones, your computer audio will be slightly out of phase.

Plug your headphones into your mixer, not your computer.

Strongly recommended: connect your computer to the internet with an Ethernet cable. Wi-Fi works, but a cable keeps the set steadier.

FromToCable
Pioneer DJM-A7USB A or USB BComputerUSBUSB-C to USB-C
Audio interfaceUSBComputerUSBUSB cable
Audio interfaceOutputsPowered speakers or amp
Pioneer DJM-A7PHONESHeadphones

Your computer

Your gear

Club mixer (with CDJs, turntables or a controller)

Playing vinyl? Plug your turntables into the mixer as usual: your B2B partner hears your records through it. BPM, key and the shared waveform need digital players.

Your mixer

Pioneer DJM-A7

  1. Download the DJM-A7 software: on Windows it installs the audio driver and the Setting Utility; on a Mac, only the Setting Utility.
  2. On a Mac: Open the download (the .dmg, then DJM-A7SettingUtility.pkg) and follow the steps. Plug the mixer in when it's done.
  3. On Windows: Open the download and follow the steps. Plug the mixer in when it's done.
  4. On a Mac: Finder → Applications → AlphaTheta → DJM-A7 → DJM-A7 Setting Utility.
  5. On Windows: Windows 11: Start → All Apps → AlphaTheta → DJM-A7 Setting Utility. Windows 10: Start → AlphaTheta → DJM-A7 Setting Utility.
  6. Click the MIXER OUTPUT tab, and under Mixer Audio Output set USB 1/2 to MIX(REC OUT with MIC).
  7. Add the additional cables in accordance with the selected diagram above.
  8. On a Mac: Sound from other DJs is allocated a channel on your mixer. This is your B2B channel. Choose a B2B channel on your mixer by turning the channel's input selector to match your computer's input - the computer mark (a laptop icon), A or B.
  9. On Windows: Your B2B channel is CH1: turn CH1's input selector to the computer mark (a laptop icon), A or B, whichever your computer is connected to.
  10. Master and booth levels off to infinity to avoid phasing.
  11. On a Mac: In DJ back 2 back's Settings → Audio, find Source and pick the DJM-A7 with Source channels USB 1/2. Under Line out, pick the DJM-A7 with Line out channels for your B2B channel: USB1/2 for CH1, 3/4 for CH2, 5/6 for CH3, 7/8 for CH4.
  12. On Windows: On the Sound panel's Playback tab, open your mixer's Properties, go to Advanced, and untick "Allow applications to take exclusive control of this device". Do the same on the Recording tab. Otherwise another app can take over your mixer, and DJ back 2 back goes silent.
  13. On Windows: In DJ back 2 back's Settings → Audio, find Source and pick the DJM-A7 with Source channels USB 1/2. Under Line out, pick the DJM-A7 with Line out channels for your B2B channel: USB1/2 for CH1.

PA or Mains

  • Powered speakers: run a cable from your audio interface's speaker outputs straight into the speakers.
  • On a Mac: Powered speakers: run a cable from your Mac's output straight into the speakers.
  • On Windows: Powered speakers: run a cable from your PC's output straight into the speakers.
  • Your laptop's own speakers play your set and your B2B partner's. Fine for practice; for louder sound, use Pro or Home.
  • An amp and speakers: run the same cable into the amp's input. The amp drives your speakers as usual.
  • In your first session: while you play, your track should sound once and clean. Once your B2B partner has taken over, your speakers play their set, it's not in your headphones. After handover it's back on your mixer ready to beatmatch.

Your B2B channel's fader (optional)

  • In Settings → MIDI Learn, learn your B2B channel's fader, with your mixer's MIDI on.

In a set

In a set, the app shows these buttons and messages: READY · Set starts in · Handover · Accept handover · Confirm partner is mixed out · Fader up.

  • When offered a handover, make sure your B2B channel's fader is up, then click Accept and mix in your track.
  • You have control. Once you're in, confirm your partner is mixed out.
  • When you're ready, you hand over, your partner accepts and tells you when you're mixed out, and you can stop your track.

Your internet

Use a wired connection wherever possible.

Upload speed: 5 Mbps or more, or quality may drop.

How a set sounds depends on both DJs' internet connections, which we don't control. We can't promise a connection will be good enough.

Any issues? Email support@djback2back.com