Doors just opened. It's still the warm-up in here. Grab your spot and check back as the floor fills up.

B2B Beta
Menu

Set up your sound

A standalone controller (Another mixer or player) with VirtualDJ · RME Babyface Pro FS

Follow these steps in order. The app's setup takes you through the same ones.

Any issues? Email support@djb2b.com

Your gear

Pick what you DJ on. Standalone controller

Your model

On a Mac

Pick your model, so we can show you its steps. Another mixer or player

  1. Connect your mixer's or player's record output (or its master) to your interface's inputs 1-2. That's your mix.
  2. Connect your interface's outputs 1-2 to one channel's line input, and set that channel to Line. That channel is your partner's fader.
  3. Plug your speakers into your interface's outputs 3-4, or into this computer.
  4. If your speakers are on outputs 3-4: in Audio MIDI Setup, select your interface, click Configure Speakers, and set it to Quadraphonic, so this Mac sees 4 outputs.
  5. At Your sound in and out, choose your interface: inputs 1-2 for your mix, outputs 1-2 for your partner, and your speakers.

Connect your Mac to your stack

  • Powered speakers: run a cable from your Mac's output (or your audio interface's outputs) straight into the speakers.
  • An amp and speakers: run the same cable into the amp's input. The amp drives your speakers as usual.
  • Not from your mixer's master out: your Mac plays the right sound at every point of a handover. And not Bluetooth or AirPlay: they add too much delay.

Your software

Pick the DJ software you play with. VirtualDJ

  1. Pick VirtualDJ, under DJ software.
  2. On a Mac: to bring your partner up on a deck instead, tick the VirtualDJ box, pick a virtual audio device (such as Serato Virtual Audio) as the output, and set a deck's line input to it in VirtualDJ. The line input may need a paid VirtualDJ licence.
  3. On Windows: to bring your partner up on a deck instead, tick the VirtualDJ box, pick a virtual audio device as the output, and set a deck's line input to it in VirtualDJ. The line input may need a paid VirtualDJ licence.
  4. In VirtualDJ, open Settings: its button is in the Application Controls.
  5. In Audio Setup, click LINE INPUT. In the new line's SoundCard field, choose the virtual audio device you picked for Your partner. Click APPLY.
  6. On the deck you keep for your partner, open the Custom Buttons panel (Pro and Performance layouts), pick the Timecode & Line-In view with the View Selection button, and turn Line-In on. Your partner plays on that deck.

Interfaces that suit this setup

On a Mac

This setup needs an audio interface with two line inputs (for your mix) and two outputs (for your partner). If it has four outputs, your speakers can go on outputs 3-4. If it has two, plug your speakers into your computer.

Check your mixer's manual for its sockets.

RME Babyface Pro FS · 4 inputs, and 2 line outputs on XLR.

Should work: It has what the app needs, but we haven't tried it yet.

In a set, you'll see these buttons and messages:

  • READY · Set starts in · Handover · Accept handover · Partner mixed out · Fader up
  • You have control. Press Partner mixed out when you're in; your partner can stop their track.
  • Handover complete. Keep your track playing until your partner mixes you out.
  • Your partner has mixed you out. You can stop your track now.
  • After you've taken over, pull your partner's fader all the way down for 10 seconds, and they're told they can stop: the same as pressing Partner mixed out.
  • Your partner's fader is down. Push it up before you Accept.

Your internet

Use a wired connection if you can: an Ethernet cable from your computer to your router. Wi-Fi drops out more often, and a dropout can be heard in the set.

Upload speed: 5 Mbps or more, or quality may drop. The app checks both uploads when you link. On a slower upload, that DJ's part of their partner's recording is at the live sound's quality. If a connection slows during the set, the full-quality recording needs time to finish after you leave, up to 15 minutes; anything it can't finish by then is at the live sound's quality.

How a set sounds depends on both DJs' internet connections, which we don't control. We can't promise a connection will be good enough, so try a short set together first.