Set up your audio
Pioneer DDJ-SR2
Plug your headphones into your mixer or controller, not your computer.
| From | To | Cable | |
|---|---|---|---|
| ControllerUSB | ComputerUSB | USB cable | |
| ControllerMaster out | Powered speakers or amp | ||
| ControllerPhones | Headphones |
If your controller has no master out, use an audio interface for your speakers.
Your computer
Your gear
USB controller
- Plug in your controller and open your DJ software.
- On a Mac: In your DJ software's audio settings, set the output to your controller itself, not a combined (aggregate) device.
- On Windows: Never put headphones on a second device or adapter.
- If your controller gives your computer only one stereo pair, you can't hear your B2B partner on their own in your headphones: use an audio interface or a controller with four outputs, or try it and let us know how you get on.
- Keep one deck empty, for example deck 1: that's your B2B channel. In MIDI Learn, map its fader, EQ and filter: your DJ software hears these knobs too.
Your controller
Pioneer DDJ-SR2
- Install Pioneer's audio driver for the DDJ-SR2, on a Mac or Windows, from AlphaTheta's support page.
- Set your B2B channel's input selector to its DECK position (DECK1 or DECK3 on the left channel, DECK2 or DECK4 on the right).
- In your DJ software, set main to the DDJ-SR2's outputs 1–2 and headphones to its outputs 3–4.
- On Windows this way isn't tested yet: for now, use the Pioneer DDJ-SR2 under Standalone, with an audio interface.
Your DJ software
Open rekordbox first. Then in DJ back 2 back, go to Settings → Audio and under Source pick rekordbox from the DJ software list (press Refresh if you don't see it). DJ back 2 back sends only rekordbox's sound.
On a Mac: The first time, your Mac asks to let DJ back 2 back record system audio. Click Allow.
Note your current audio settings first, so you can switch back after your set. This will be automated in future.
On a Mac: Your controller isn't on rekordbox's list of compatible controllers, so rekordbox's guide has no step for it.
In a set
In a set, the app shows these buttons and messages: READY · Set starts in · Handover · Accept handover · Confirm partner is mixed out · Fader up.
- When offered a handover, make sure your B2B channel's fader is up, then click Accept and mix in your track.
- You have control. Once you're in, confirm your partner is mixed out.
- When you're ready, you hand over, your partner accepts and tells you when you're mixed out, and you can stop your track.
Your internet
Use a wired connection wherever possible.
Upload speed: 5 Mbps or more, or quality may drop.
How a set sounds depends on both DJs' internet connections, which we don't control. We can't promise a connection will be good enough.
Any issues? Email support@djb2b.com