Doors just opened. It's still the warm-up in here. Grab your spot and check back as the floor fills up.

B2B Beta

Set up your audio

Denon DJ MC7000

Wiring: computer, controller, powered speakers or amp, headphonesComputerUSBControllerUSBmaster outphonesPowered speakersor ampHeadphonesUSB cable

Plug your headphones into your mixer or controller, not your computer.

FromToCable
ControllerUSBComputerUSBUSB cable
ControllerMaster outPowered speakers or amp
ControllerPhonesHeadphones

If your controller has no master out, use an audio interface for your speakers.

Your computer

Your gear

USB controller

  1. Plug in your controller and open your DJ software.
  2. On a Mac: In your DJ software's audio settings, set the output to your controller itself, not a combined (aggregate) device.
  3. On Windows: Never put headphones on a second device or adapter.
  4. If your controller gives your computer only one stereo pair, you can't hear your B2B partner on their own in your headphones: use an audio interface or a controller with four outputs, or try it and let us know how you get on.
  5. Keep one deck empty, for example deck 1: that's your B2B channel. In MIDI Learn, map its fader, EQ and filter: your DJ software hears these knobs too.

Your controller

Denon DJ MC7000

  1. On Windows: Install Denon's "Windows Driver" for the MC7000 from denondj.com/downloads.
  2. No driver to install on a Mac.
  3. On a Mac: macOS 26 Tahoe isn't on Denon's list; Denon lists it as supported on macOS 15 Sequoia (connection and MIDI).
  4. Set your B2B channel's input selector to USB.
  5. In your DJ software, set main to the MC7000's outputs 1–2 and headphones to its outputs 3–4.
  6. Your mics aren't sent to the other DJ: the MC7000 mixes them in its own hardware.
  7. On Windows this way isn't tested yet: for now, use the Denon DJ MC7000 under Standalone, with an audio interface.

Your DJ software

Open rekordbox first. Then in DJ back 2 back, go to Settings → Audio and under Source pick rekordbox from the DJ software list (press Refresh if you don't see it). DJ back 2 back sends only rekordbox's sound.

On a Mac: The first time, your Mac asks to let DJ back 2 back record system audio. Click Allow.

Note your current audio settings first, so you can switch back after your set. This will be automated in future.

On a Mac: Your controller isn't on rekordbox's list of compatible controllers, so rekordbox's guide has no step for it.

In a set

In a set, the app shows these buttons and messages: READY · Set starts in · Handover · Accept handover · Confirm partner is mixed out · Fader up.

  • When offered a handover, make sure your B2B channel's fader is up, then click Accept and mix in your track.
  • You have control. Once you're in, confirm your partner is mixed out.
  • When you're ready, you hand over, your partner accepts and tells you when you're mixed out, and you can stop your track.

Your internet

Use a wired connection wherever possible.

Upload speed: 5 Mbps or more, or quality may drop.

How a set sounds depends on both DJs' internet connections, which we don't control. We can't promise a connection will be good enough.

Any issues? Email support@djb2b.com